0
0 items
£0.00
No products in the cart.
MP588 7 Pin 1.5m 2×7 Pin Plugs & 7 Core Curly Connecting Lead
£14.95 Ex VAT
MP588 7 Pin 1.5m 2×7 Pin Plugs & 7 Core Curly Connecting Lead
- 1.5m 7 core curly connecting lead with 2 x 7 pin plugs, used to supply lighting functionality to trailers.
- 2 x 7 pin plugs
- 1.5m 7 core curly cable
- Complies with ISO 1724
In Stock
Category: Electrics
Related products
MP6015B Adaptor 13 Pin Vehicle to 7 Pin Trailer
Add to basket - For the connection of a trailer equipped with a 7 Pin 12N plug to a towing vehicle equipped with a 13 pin socket
- To convert a 13 Pin socket into a 12N 7 Pin socket.
- Model type: Plastic mini adaptor block with cap
- Pins: Brass
- No need for expensive rewiring
- Easy to fit, use and store
- Provides a connection for road lighting functions (exc. Reverse)
- With weatherproof spring-loaded cap
Add to Wishlist
Add to Wishlist
MP1805B 13 Pin Towbar Socket Tester
Add to basket - 13 Pin towbar socket tester is perfect for checking all electrical circuits are working correctly after installation and before towing.
- Note: all caravan or trailer road lights should also be checked before every journey.
- Fitted with approx. 3.5m cable to allow testing while seated in the driver’s seat
- Suitable for 12 volt vehicles fitted with a 13 Pin socket
- Not approved for MOT test centre use
- Note – circuits 8, 9 & 10 may not be present in all 13 Pin towbar applications
- Checks for:
- Left position & right position
- Left indicator & right indicator
- Stop
- Fog
- Reverse
- 12v+ permanent supply
- 12v+ switched supply
Add to Wishlist
Add to Wishlist
MP383 12N 1.5m Wiring Kit With Audible Relay
Add to basket -
- Towbar wiring kit with audible relay, 12N 7 pin pre-wired socket with 1.5m cable and mounting plate with gasket, fixing bolts, snap connectors
- Suitable for vehicles with constant rate direction indicator flasher units
- Audible Sensor Relay
Add to Wishlist
Add to Wishlist
MP1802B 13 Pin Car and Trailer Tester
Add to basket - 13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits
- LED indicators clearly show any faults
- Suitable for testing LED & filament bulb trailer lighting
- Requires 1 x 9V PP3 battery (not included)
- Notes & instructions for use:
- The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test
- LED indicators will show green when function is tested and correctly wired, or red if a fault is present
- 12V power supplies can only be tested on the towbar side
- Towbar testing requires vehicle ignition to be switched on and each function activated in turn
- Only for use with 13 pin plugs and sockets.
- Do not check towbar and trailer functions at the same time
Add to Wishlist
Add to Wishlist




