MP5893 8 Pin 1.5m 2×8 Pin Plugs & 8 Core Curly Connecting Lead

£19.99 Ex VAT

MP5893 8 Pin 1.5m 2×8 Pin Plugs & 8 Core Curly Connecting Lead

1.5m 8 core curly connecting lead with 8 pin plug to 8 pin plug, used to supply lighting functionality to trailers.
2 x 8 pin plugs
1.5m 8 core curly cable
Complies with ISO 11446

In Stock

Category: Electrics

Related products

£4.99 Ex VAT

In Stock

£14.95 Ex VAT

In Stock

MP1802B 13 Pin Car and Trailer Tester

13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits
LED indicators clearly show any faults
Suitable for testing LED & filament bulb trailer lighting
Requires 1 x 9V PP3 battery (not included)
Notes & instructions for use:
- The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test
- LED indicators will show green when function is tested and correctly wired, or red if a fault is present
- 12V power supplies can only be tested on the towbar side
- Towbar testing requires vehicle ignition to be switched on and each function activated in turn
- Only for use with 13 pin plugs and sockets.
- Do not check towbar and trailer functions at the same time

£8.49 Ex VAT

In Stock

£41.95 Ex VAT

In Stock

MP180B 7 Pin Towbar Socket Tester

7 Pin towbar socket tester is perfect for checking all electrical circuits are working correctly after installation and before towing.
Note: all caravan or trailer road lights should also be checked before every journey.
Fitted with approx. 3.5m cable to allow testing while seated in the driver’s seat
Suitable for 12 volt vehicles fitted with a 7 Pin socket
Checks for:
- Left position & right position
- Left indicator & right indicator
- Stop
- Fog
- Reverse
12v+ permanent supply
12v+ switched supply