0
0 items
£0.00
No products in the cart.
MP6005B 7 Pin Vehicle To 13 Pin Trailer Adaptor
£4.99 Ex VAT
MP6005B 7 Pin Vehicle To 13 Pin Trailer Adaptor
-
- For the connection of a trailer equipped with a 13 pin plug to a towing vehicle equipped with a 7 pin 12N socket
- Model type: plastic mini adaptor block
- Pins: brass
- No need for expensive rewiring
- Easy to fit and store
- Provides a connection for road lighting functions (excluding reverse)
In Stock
Category: Electrics
Related products
MP3837 7 Pin 1.5m Wiring Kit With Bypass Relay
Add to basket - 7 Pin towbar wiring kit with by-pass relay, 1.5m 7 core trailer cable and single mounting plate, gasket fixing bolts & snap connectors
- Kit contents:
- 7 Pin N&S Type Socket Assembly with Mounting Plate
- 12v 7 Way Bypass Relay
- 5m x 3.0mm 27 Amp Single Core Cable
- 7 x Blue Snap Connectors
- 2 x 6.4mm Blue Pre-Insulated Ring Terminals
- 1 x 8.4mm Yellow Pre-Insulated Ring Terminal
- 2 x 6.4mm Yellow Pre-Insulated Blade Terminals
- 1 x Inline Blade Fuse Holder
- 1 x 15 Amp Blade Fuse
- Has the facility to power a tell-tale
- Instructions included
Add to Wishlist
Add to Wishlist
MP383 12N 1.5m Wiring Kit With Audible Relay
Add to basket -
- Towbar wiring kit with audible relay, 12N 7 pin pre-wired socket with 1.5m cable and mounting plate with gasket, fixing bolts, snap connectors
- Suitable for vehicles with constant rate direction indicator flasher units
- Audible Sensor Relay
Add to Wishlist
Add to Wishlist
MP31 12S Type 7 Pin Plastic Socket
- 12V ‘S’ type 7 pin plastic socket ideal for caravans
- Body style: Plastic
- Pins: Brass with screw terminals
- Requires rear gasket MP68B
- Designed to conform to ISO 3732
- Ideal for caravans
Add to Wishlist
Add to Wishlist
MP1802B 13 Pin Car and Trailer Tester
Add to basket - 13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits
- LED indicators clearly show any faults
- Suitable for testing LED & filament bulb trailer lighting
- Requires 1 x 9V PP3 battery (not included)
- Notes & instructions for use:
- The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test
- LED indicators will show green when function is tested and correctly wired, or red if a fault is present
- 12V power supplies can only be tested on the towbar side
- Towbar testing requires vehicle ignition to be switched on and each function activated in turn
- Only for use with 13 pin plugs and sockets.
- Do not check towbar and trailer functions at the same time
Add to Wishlist
Add to Wishlist




